2.20.5 UPD 1 nov Windows, Linux

Descargar PeakMiner

Windows Linux

Historial de versiones de PeakMiner

10 versiones, las más recientes primero. Las notas se citan tal como las publicó el desarrollador (en inglés).

PeakMiner 2.20.6rc1 Prelanzamiento

· Página del lanzamiento

⚠️ Pre-release for testing. Not recommended for production rigs.

PeakMiner v2.20.6rc1

  • 🐞 Quantus (QUAN) on AMD: fixes a hashrate drop on Radeon RX 400 and RX 500 series cards running an older AMD driver. Affected rigs mined at a lower rate than the same card on a recent driver, with no error shown. Cards on a recent driver were not hit by this.
  • 🔧 Bug fixes for steadier running over a long session.

Nothing to configure: update the miner and both apply on their own.

No flags, defaults or flight sheet fields changed in this build. Everything else carries over unchanged from v2.20.5, including the Pearl fixes and hashrate gains on RTX 50xx.

Testing this pre-release
  • 🪟 Windows: download the zip below, then run the .bat for your coin (edit your wallet first) or the manual command in README.txt.
  • 🐧 HiveOS: build the flight sheet as usual, and set the Installation URL by hand to the RC package below. The published flight sheets still point at v2.20.5.
  • ⛏️ mmpOS: add a custom miner pointing at the same .tar.gz below.
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.6rc1 (or docker pull peakminer/peakminer:rc). The latest tag stays on v2.20.5.
  • 🐞 Found a problem? Open an issue at https://github.com/peakminer/peakminer/issues and say which card, OS and driver version you ran.

Most useful to report:

  • QUAN on Radeon RX 400 or RX 500 series, on the driver you actually run: the hashrate next to v2.20.5 on the same card at the same clocks. Please say which driver version, since that is what this fix turns on.
  • Whether a QUAN rig on those cards now reaches the rate you get on a recent driver, or still falls short.
  • Whether rigs stay up and keep hashing over a long run, on any coin and any card.
  • Whether accepted and invalid share counts stay where they were on v2.20.5 after a few hours of mining.
  • The other coins and the NVIDIA cards should be unchanged. If anything moved either way on your rigs, that is worth reporting.

This build reports build=20261104-8ae320, so peakminer --version tells it apart from v2.20.5.

Results that show no change are just as useful as confirmations.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.6rc1/peakminer-2.20.6rc1-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.6rc1/peakminer-2.20.6rc1.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.6rc1
Checksums
✓  peakminer-2.20.6rc1.tar.gz
   sha256: 651cdb24c084273cf54d5ed98c989ac24851e36a3de1abfdbef6c217dd93f01b
✓  peakminer-2.20.6rc1-linux-x86_64  (packed)
   sha256: 6b14c20254e05b8a2417c120542e1126616968868acf48a02666cdce17b4901a
✓  peakminer-2.20.6rc1-windows-x86_64.zip
   sha256: a44f984f2d66cc6fc9fb5fcecb7fd011ac7dd8dfa18c4409ce84a801d2582da0

PeakMiner 2.20.5 Actual

· Página del lanzamiento

PeakMiner v2.20.5

  • 🐞 Pearl (PRL): fixes a crash on RTX 50xx running an older NVIDIA driver. Affected rigs went down while mining Pearl and had to be restarted. Rigs on a recent driver were not hit by this.
  • ⚡ Pearl (PRL): higher hashrate on RTX 50xx.
  • 🔧 Pearl (PRL): steadier hashrate over a long run on RTX 50xx, so the average your pool credits you sits closer to what the miner reports.

Nothing to configure: update the miner and all three apply on their own. No flags, defaults or flight sheet fields changed in this release.

Tested through v2.20.5rc1. This build is identical to rc1 apart from the version stamp: the Linux binary and the Windows zip are byte for byte the same files.

Everything else carries over unchanged from v2.20.4, including the Pearl and Quantus hashrate per watt gains and the Windows console stall fix.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.5/peakminer-2.20.5-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.5/peakminer-2.20.5.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.5
Checksums
✓  peakminer-2.20.5.tar.gz
   sha256: c440ce7a4d23995b20b858bc92df2686a4ebef19aa58050761c97af95ab307ad
✓  peakminer-2.20.5-linux-x86_64  (packed)
   sha256: 2b33388b20c11696593c2e146a5ff80f888442951e6ccd6732d070cd939dcd47
✓  peakminer-2.20.5-windows-x86_64.zip
   sha256: 3f339a85f9e01b58af67f7ea77e037b3c0c4c75e5dc5e8008d3cda6e570388e3

PeakMiner 2.20.5rc1 Prelanzamiento

· Página del lanzamiento

⚠️ Pre-release for testing. Not recommended for production rigs.

PeakMiner v2.20.5rc1

  • 🐞 Pearl (PRL): fixes a crash on RTX 50xx running an older NVIDIA driver. Affected rigs went down while mining Pearl and had to be restarted. Rigs on a recent driver were not hit by this.
  • ⚡ Pearl (PRL): higher hashrate on RTX 50xx.
  • 🔧 Pearl (PRL): steadier hashrate over a long run on RTX 50xx, so the average your pool credits you sits closer to what the miner reports.

Nothing to configure: update the miner and all three apply on their own.

No flags, defaults or flight sheet fields changed in this build. Everything else carries over unchanged from v2.20.4, including the Pearl and Quantus hashrate per watt gains and the Windows console stall fix.

Testing this pre-release
  • 🪟 Windows: download the zip below, then run the .bat for your coin (edit your wallet first) or the manual command in README.txt.
  • 🐧 HiveOS: build the flight sheet as usual, and set the Installation URL by hand to the RC package below. The published flight sheets still point at v2.20.4.
  • ⛏️ mmpOS: add a custom miner pointing at the same .tar.gz below.
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.5rc1 (or docker pull peakminer/peakminer:rc). The latest tag stays on v2.20.4.
  • 🐞 Found a problem? Open an issue at https://github.com/peakminer/peakminer/issues and say which card, OS and driver version you ran.

Most useful to report:

  • RTX 50xx on Pearl, on the driver you actually run: whether the rig stays up over a long run. Please say which driver version, since that is what this fix turns on. If it still goes down, the last lines of the log before it died.
  • PRL hashrate on RTX 50xx next to v2.20.4 on the same card at the same clocks, using the figure your pool's share accounting shows rather than the local readout.
  • Whether the PRL hashrate on RTX 50xx holds steady over several hours instead of drifting, and whether your pool side average moved closer to the local one.
  • Whether accepted and invalid share counts stay where they were on v2.20.4 after a few hours of mining.
  • The other coins and the older cards should be unchanged. If anything moved either way on your rigs, that is worth reporting.

This build reports build=20261031-1ad237, so peakminer --version tells it apart from v2.20.4.

Results that show no change are just as useful as confirmations.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.5rc1/peakminer-2.20.5rc1-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.5rc1/peakminer-2.20.5rc1.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.5rc1
Checksums
✓  peakminer-2.20.5rc1.tar.gz
   sha256: e47a0916eb020121619e176632a464d08ed7e2caa432d892815bf1f1153d5f5c
✓  peakminer-2.20.5rc1-linux-x86_64  (packed)
   sha256: 2b33388b20c11696593c2e146a5ff80f888442951e6ccd6732d070cd939dcd47
✓  peakminer-2.20.5rc1-windows-x86_64.zip
   sha256: 3f339a85f9e01b58af67f7ea77e037b3c0c4c75e5dc5e8008d3cda6e570388e3

Superseded by v2.20.5.

PeakMiner 2.20.4

· Página del lanzamiento

PeakMiner v2.20.4

  • ⚡ Pearl (PRL): higher hashrate per watt on RTX 40xx and RTX 50xx.
  • ⚡ Quantus (QUAN): higher hashrate per watt on RTX 20xx, RTX 30xx, RTX 40xx and RTX 50xx.
  • 🐞 Windows: the miner no longer stalls when you select text in its console window. Selecting or dragging inside the window used to park the miner: the card stayed under load, but no share reached the pool until someone pressed a key in that window. Reported in #46.

Nothing to configure: update the miner and all three apply on their own. No flags, defaults or flight sheet fields changed in this release.

Tested through v2.20.4rc1. This build is identical to rc1 apart from the version stamp: the Linux binary and the Windows zip are byte for byte the same files.

Everything else carries over unchanged from v2.20.3.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.4/peakminer-2.20.4-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.4/peakminer-2.20.4.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.4
Checksums
✓  peakminer-2.20.4.tar.gz
   sha256: aae7b272b6f59b9b7a32c6c38c601ac7b045dbd8edb05822f160ade23f3891a2
✓  peakminer-2.20.4-linux-x86_64  (packed)
   sha256: c6ba6cc24d763f77111055ef34b286def6c1a0f46cffd0493b995ff071d241db
✓  peakminer-2.20.4-windows-x86_64.zip
   sha256: 4dc0db41eaeec0dcee64f3f33b4b13cc052bbd93a8a59e3582853e62e9fbe0ad

PeakMiner 2.20.4rc1 Prelanzamiento

· Página del lanzamiento

⚠️ Pre-release for testing. Not recommended for production rigs.

PeakMiner v2.20.4rc1

  • ⚡ Pearl (PRL): higher hashrate per watt on RTX 40xx and RTX 50xx.
  • ⚡ Quantus (QUAN): higher hashrate per watt on RTX 20xx, RTX 30xx, RTX 40xx and RTX 50xx.
  • 🐞 Windows: the miner no longer stalls when you select text in its console window. Selecting or dragging inside the window used to park the miner: the card stayed under load, but no share reached the pool until someone pressed a key in that window. Reported in #46.

Nothing to configure: update the miner and all three apply on their own.

No flags, defaults or flight sheet fields changed in this build. Everything else carries over unchanged from v2.20.3, including the Pearl crash fix on RTX 20xx.

Testing this pre-release
  • 🪟 Windows: download the zip below, then run the .bat for your coin (edit your wallet first) or the manual command in README.txt.
  • 🐧 HiveOS: build the flight sheet as usual, and set the Installation URL by hand to the RC package below. The published flight sheets still point at v2.20.3.
  • ⛏️ mmpOS: add a custom miner pointing at the same .tar.gz below.
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.4rc1 (or docker pull peakminer/peakminer:rc). The latest tag stays on v2.20.3.
  • 🐞 Found a problem? Open an issue at https://github.com/peakminer/peakminer/issues and say which card, OS and driver version you ran.

Most useful to report:

  • PRL on RTX 40xx and RTX 50xx, and QUAN on RTX 20xx, RTX 30xx, RTX 40xx and RTX 50xx: hashrate and wall power on this build next to v2.20.3 on the same card at the same clocks, using the figure your pool's share accounting shows rather than the local readout. Both numbers matter here, since the gain is in hashrate per watt.
  • Whether accepted and invalid share counts stay where they were on v2.20.3 after a few hours of mining.
  • RTX 20xx on Pearl: whether the rig still stays up over a long run, as it does on v2.20.3.
  • Windows: try selecting text in the miner window while it runs, then check that shares keep reaching your pool.
  • The other coins and the older cards should be unchanged. If anything moved either way on your rigs, that is worth reporting.

This build reports build=20261030-72a2d3, so peakminer --version tells it apart from v2.20.3.

Results that show no change are just as useful as confirmations.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.4rc1/peakminer-2.20.4rc1-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.4rc1/peakminer-2.20.4rc1.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.4rc1
Checksums
✓  peakminer-2.20.4rc1.tar.gz
   sha256: 780cb03cdfa9717fa98db23add9d4f42f3c30c325976538615197f018ee81537
✓  peakminer-2.20.4rc1-linux-x86_64  (packed)
   sha256: c6ba6cc24d763f77111055ef34b286def6c1a0f46cffd0493b995ff071d241db
✓  peakminer-2.20.4rc1-windows-x86_64.zip
   sha256: 4dc0db41eaeec0dcee64f3f33b4b13cc052bbd93a8a59e3582853e62e9fbe0ad

Superseded by v2.20.4.

PeakMiner 2.20.3

· Página del lanzamiento

PeakMiner v2.20.3

  • 🐞 Pearl (PRL): fixes a crash on RTX 20xx. Affected rigs went down while mining Pearl and had to be restarted. Nothing to configure: update the miner and the fix applies on its own.

No flags, defaults or flight sheet fields changed in this release.

Tested through v2.20.3rc1. This build is identical to rc1 apart from the version stamp: the Linux binary and the Windows zip are byte for byte the same files.

Everything else carries over unchanged from v2.20.2.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.3/peakminer-2.20.3-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.3/peakminer-2.20.3.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.3
Checksums
✓  peakminer-2.20.3.tar.gz
   sha256: 99f449c851ba40076f1525f13693cb1d130ad6a7b1267a8208603fa4f05a5e83
✓  peakminer-2.20.3-linux-x86_64  (packed)
   sha256: 345a4446acaa9213e6cd4622460b002a966dad4a8ec127f965d3a8878375fc2a
✓  peakminer-2.20.3-windows-x86_64.zip
   sha256: 95955ba25445ca849c4fd49904a59f101f836f63c6cd06f0c919a41326fe19c1

PeakMiner 2.20.3rc1 Prelanzamiento

· Página del lanzamiento

⚠️ Pre-release for testing. Not recommended for production rigs.

PeakMiner v2.20.3rc1

  • 🐞 Pearl (PRL): fixes a crash on RTX 20xx. Affected rigs went down while mining Pearl and had to be restarted. Nothing to configure: update the miner and the fix applies on its own.

No flags, defaults or flight sheet fields changed in this build. Everything else carries over unchanged from v2.20.2, including the Pearl hashrate gains on RTX 30xx, RTX 40xx and RTX 50xx and the plain_proof invalid share fix.

Testing this pre-release
  • 🪟 Windows: download the zip below, then run the .bat for your coin (edit your wallet first) or the manual command in README.txt.
  • 🐧 HiveOS: build the flight sheet as usual, and set the Installation URL by hand to the RC package below. The published flight sheets still point at v2.20.2.
  • ⛏️ mmpOS: add a custom miner pointing at the same .tar.gz below.
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.3rc1 (or docker pull peakminer/peakminer:rc). The latest tag stays on v2.20.2.
  • 🐞 Found a problem? Open an issue at https://github.com/peakminer/peakminer/issues and say which card, OS and driver version you ran.

Most useful to report:

  • RTX 20xx on Pearl: whether the rig stays up over a long run. If it still goes down, the last lines of the log before it died, plus your card, OS and driver version.
  • Whether accepted and invalid share counts stay where they were on v2.20.2 after a few hours of mining.
  • PRL hashrate on RTX 20xx next to v2.20.2 on the same card at the same clocks, using the figure your pool's share accounting shows rather than the local readout.
  • The other coins and the other cards should be unchanged. If anything moved either way on your rigs, that is worth reporting.

This build reports build=20261028-b3bf4c, so peakminer --version tells it apart from v2.20.2.

Results that show no change are just as useful as confirmations.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.3rc1/peakminer-2.20.3rc1-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.3rc1/peakminer-2.20.3rc1.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.3rc1
Checksums
✓  peakminer-2.20.3rc1.tar.gz
   sha256: b615c7e3b4323ec495d2770e044e572a6454dff45558c8d26737fa588d35bc5b
✓  peakminer-2.20.3rc1-linux-x86_64  (packed)
   sha256: 345a4446acaa9213e6cd4622460b002a966dad4a8ec127f965d3a8878375fc2a
✓  peakminer-2.20.3rc1-windows-x86_64.zip
   sha256: 95955ba25445ca849c4fd49904a59f101f836f63c6cd06f0c919a41326fe19c1

Superseded by v2.20.3.

PeakMiner 2.20.2

· Página del lanzamiento

PeakMiner v2.20.2

  • ⚡ Pearl (PRL): higher hashrate on RTX 30xx, RTX 40xx and RTX 50xx. Nothing to configure: update the miner and it applies on its own.
  • 🐞 Pearl (PRL): fixes the invalid shares rejected with plain_proof expands more than 180x its wire size. Affected rigs were losing a share here and there to the pool even on a stock configuration.
    • Reported in #42, thanks to @pablovesnine for the report and the logs.

No flags, defaults or flight sheet fields changed in this release.

Tested through v2.20.2rc2. This build is identical to rc2 apart from the version stamp: the Linux binary and the Windows zip are byte for byte the same files.

Everything else carries over unchanged from v2.20.1.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.2/peakminer-2.20.2-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.2/peakminer-2.20.2.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.2
Checksums
✓  peakminer-2.20.2.tar.gz
   sha256: df8fa16dec80354765d8969557325a98029523216e54d0b67b250cd748524c94
✓  peakminer-2.20.2-linux-x86_64  (packed)
   sha256: 6095b04fc0f40616c2b4e7ea94f370c2fe245a2fdddf3d46258a909d5127b045
✓  peakminer-2.20.2-windows-x86_64.zip
   sha256: 64b699d4b3624bf84a74be07ebacef0505a403b18e320dd2984b41240fc68a34

PeakMiner 2.20.2rc2 Prelanzamiento

· Página del lanzamiento

Superseded by v2.20.2.

⚠️ Pre-release for testing. Not recommended for production rigs.

PeakMiner v2.20.2rc2

  • 🐞 Pearl (PRL): fixes the invalid shares rejected with plain_proof expands more than 180x its wire size. Affected rigs were losing a share here and there to the pool even on a stock configuration. Nothing to configure: update the miner and the fix applies on its own.
    • Reported in #42, thanks to @pablovesnine for the report and the logs.
  • ⚡ Carries the Pearl hashrate gains on RTX 30xx, RTX 40xx and RTX 50xx from v2.20.2rc1.

No flags, defaults or flight sheet fields changed in this build. Everything else carries over unchanged from v2.20.1.

Testing this pre-release
  • 🪟 Windows: download the zip below, then run the .bat for your coin (edit your wallet first) or the manual command in README.txt.
  • 🐧 HiveOS: build the flight sheet as usual, and set the Installation URL by hand to the RC package below. The published flight sheets still point at v2.20.1.
  • ⛏️ mmpOS: add a custom miner pointing at the same .tar.gz below.
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.2rc2 (or docker pull peakminer/peakminer:rc). The latest tag stays on v2.20.1.
  • 🐞 Found a problem? Open an issue at https://github.com/peakminer/peakminer/issues and say which card, OS and driver version you ran.

Most useful to report:

  • Whether the plain_proof invalid shares are gone: mine Pearl for a few hours and compare the accepted and invalid counts your pool reports against what rc1 or v2.20.1 gave you on the same rig.
  • If you still see any invalid share on this build, the exact reason line from the log, plus your card, OS and driver version.
  • PRL on RTX 30xx, RTX 40xx and RTX 50xx: hashrate and wall power next to v2.20.1 on the same card at the same clocks, using the figure your pool's share accounting shows rather than the local readout.
  • The other coins and the older cards should be unchanged. If anything moved either way on your rigs, that is worth reporting.

Note that --version on this build still prints the same build id as rc1, so check which package you installed rather than the banner.

Results that show no change are just as useful as confirmations.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.2rc2/peakminer-2.20.2rc2-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.2rc2/peakminer-2.20.2rc2.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.2rc2
Checksums
✓  peakminer-2.20.2rc2.tar.gz
   sha256: 518fd158cc6b792a07a07408a36c65421a820744735801b7090e18766b2447ad
✓  peakminer-2.20.2rc2-linux-x86_64  (packed)
   sha256: 6095b04fc0f40616c2b4e7ea94f370c2fe245a2fdddf3d46258a909d5127b045
✓  peakminer-2.20.2rc2-windows-x86_64.zip
   sha256: 64b699d4b3624bf84a74be07ebacef0505a403b18e320dd2984b41240fc68a34

PeakMiner 2.20.2rc1 Prelanzamiento

· Página del lanzamiento

Superseded by v2.20.2.

⚠️ Pre-release for testing. Not recommended for production rigs.

PeakMiner v2.20.2rc1

  • ⚡ Pearl (PRL): higher hashrate on RTX 30xx, RTX 40xx and RTX 50xx. Nothing to configure: update the miner and it applies on its own.

No flags, defaults or flight sheet fields changed in this build. Everything else carries over unchanged from v2.20.1.

Testing this pre-release
  • 🪟 Windows: download the zip below, then run the .bat for your coin (edit your wallet first) or the manual command in README.txt.
  • 🐧 HiveOS: build the flight sheet as usual, and set the Installation URL by hand to the RC package below. The published flight sheets still point at v2.20.1.
  • ⛏️ mmpOS: add a custom miner pointing at the same .tar.gz below.
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.2rc1 (or docker pull peakminer/peakminer:rc). The latest tag stays on v2.20.1.
  • 🐞 Found a problem? Open an issue at https://github.com/peakminer/peakminer/issues and say which card, OS and driver version you ran.

Most useful to report:

  • PRL on RTX 30xx, RTX 40xx and RTX 50xx: hashrate and wall power on this build next to v2.20.1 on the same card at the same clocks, using the figure your pool's share accounting shows rather than the local readout.
  • Whether accepted and invalid share counts stay where they were on v2.20.1 after a few hours of mining.
  • The other coins and the older cards should be unchanged. If anything moved either way on your rigs, that is worth reporting.

Results that show no change are just as useful as confirmations.

Downloads
  • 🪟 Windows: https://github.com/peakminer/peakminer/releases/download/v2.20.2rc1/peakminer-2.20.2rc1-windows-x86_64.zip
  • 🐧 HiveOS / mmpOS / Linux: https://github.com/peakminer/peakminer/releases/download/v2.20.2rc1/peakminer-2.20.2rc1.tar.gz
  • 🐳 Docker: docker pull peakminer/peakminer:2.20.2rc1
Checksums
✓  peakminer-2.20.2rc1.tar.gz
   sha256: d4006ef768da9ee358c95be30fce277ec781320ad0c03f1ee2707d0934c80930
✓  peakminer-2.20.2rc1-linux-x86_64  (packed)
   sha256: 03ea3d1c60ff4f3b01a9f36232bbc639d3d618b9d4fccad9468e84033d2119a7
✓  peakminer-2.20.2rc1-windows-x86_64.zip
   sha256: 93b63b7dc14bda17e91062663de5776d27c98661799e603549903dc0ece78853

Descargar PeakMiner

2.20.5
Windows Linux