Team Red Miner
TeamRedMiner is a miner only for AMD video cards. This miner will not work with Nvidia cards.
Pros:
- Well and fine-tuned;
- Supports a great amount of coins;
- Automatic card tuning for extra performance, stability, and reduced consumption;
- Reliable built-in watchdog;
- High compatibility with a large number of AMD cards.
Cons:
- Does not work with Nvidia cards;
- No WEB interface;
- Overloaded interface;
- No support for the -rxboost 1 argument for AMD RX 400\500 cards, which allows squeezing another 1 or 2 megahashes out of these cards.
List of coins and algorithms
Ethash
Kawpow
Verthash
Autolykos2
Ton
Kaspa
Nimiq
Cryptonight R
Cryptonight v8 upx2
Cryptonight v8 turtle
Cryptonight v8 half
Cryptonight v8 double
Cryptonight v8 rwz
Cryptonight v8
Cryptonight heavy
Cryptonight haven
Cryptonight saber
Cryptonight conceal
Chukwa-512 (Turtlecoin)
Chukwa-1024 (Turtlecoin)
x16r
x16rv2
x16s
x16rt
MTP
Cuckatoo31
Cuckarood29
Lyra2rev3
Lyra2z
Phi2
Fees
| Ethash on Polaris GPUs | 0.75% |
|---|---|
| Ethash on all other GPUs | 1.0% |
| Kawpow | 2.0% |
| Verthash | 2.0% |
| Autolykos2 | 2.0% |
| Ton | 1.0% |
| Kaspa | 1.0% |
| Nimiq | 2.5% |
| Cryptonight R | 2.5% |
| Cryptonight v8 upx2 | 2.5% |
| Cryptonight v8 turtle | 2.5% |
| Cryptonight v8 half | 2.5% |
| Cryptonight v8 double | 2.5% |
| Cryptonight v8 rwz | 2.5% |
| Cryptonight v8 | 2.5% |
| Cryptonight heavy | 2.5% |
| Cryptonight haven | 2.5% |
| Cryptonight saber | 2.5% |
| Cryptonight conceal | 2.5% |
| Chukwa-512 (Turtlecoin) | 2.5% |
| Chukwa-1024 (Turtlecoin) | 2.5% |
| x16r | 2.5% |
| x16rv2 | 2.5% |
| x16s | 2.5% |
| x16rt | 2.5% |
| MTP | 2.5% |
| Cuckatoo31 | 2.5% |
| Cuckarood29 | 2.5% |
| Lyra2rev3 | 2.5% |
| Lyra2z | 3.0% |
| Phi2 | 3.0% |
Supported GPUs
- Navi RX 5700(XT)/5600(XT)/5500(XT) for supported algos in the table below.
- Big Navi RX 6900XT, RX 6800(XT), RX 6700(XT), RX6600XT - same support as for Navi.
- Vega RX Vega 64/56, Vega FE, Radeon VII (Vega 2)
- Polaris RX 580/480/570/470/560/460/550
- Fiji R9 Fury/Fury X/Nano, MI8 (supported but with very limited testing).
- Tonga/Antigua R9 285/285X/380/380X, W7100, S7150 (beta support from 0.8.2. Only ethash+kawpow available.)
Some algorithms are not supported on some GPU architectures and/or drivers.
Below is the compatibility table:
| Navi | Vega | Polaris | Fiji | Tonga | |
|---|---|---|---|---|---|
| Ethash | Y | Y | Y | Y | Y |
| Kawpow | Y | Y | Y | Y | Y |
| Verthash | Y | Y | Y | Y | N |
| Autolykos2 | Y | Y | Y | Y | Y |
| Firopow | Y | Y | Y | Y | Y |
| Ton | Y | Y | Y | Y | Y |
| Kaspa | Y | Y | Y | Y | Y |
| Nimiq | Y | Y | Y | Y | N |
| Cryptonight R | N | L | L | L | N |
| Cryptonight v8 upx2 | N | L | L | L | N |
| Cryptonight v8 turtle | N | L | L | L | N |
| Cryptonight v8 half | N | L | L | L | N |
| Cryptonight v8 double | N | L | L | L | N |
| Cryptonight v8 rwz | N | L | L | L | N |
| Cryptonight v8 | N | L | L | L | N |
| Cryptonight heavy | N | L | L | L | N |
| Cryptonight haven | N | L | L | L | N |
| Cryptonight saber | N | L | L | L | N |
| Cryptonight conceal | N | L | L | L | N |
| Chukwa-512 | N | L | L | L | N |
| Chukwa-1024 | N | L | L | L | N |
| x16r | N | Y | Y | Y | N |
| x16rv2 | N | Y | Y | Y | N |
| x16s | N | Y | Y | Y | N |
| x16rt | N | Y | Y | Y | N |
| MTP | Y | Y | Y | Y | N |
| Cuckatoo31 | N | Y | Y | Y | N |
| Cuckarood29 | N | Y | Y | Y | N |
| Lyra2rev3 | N | L | L | L | N |
| Lyra2z | N | L | L | L | N |
| Phi2 | N | L | L | L | N |
Support legend:
- Y = Supported
- N = Not supported
- L = Limited support: algos are supported on windows and linux with amdgpu-pro drivers, not supported on ROCm drivers.
FPGA Support
FPGA Devices supported and tested in Linux (Windows is not currently supported):
- Xilinx Varium C1100
- SQRL Forest Kitten 33 - performance limited by product design, see guide for details
- Xilinx/TUL/Osprey U50C/ECU50
- TUL TH53/55
- Osprey E300
- Bittware CVP13
- SQRL BCU1525/TUL BTU9P/Osprey ECU200
Supported FPGA algorithms and their respective dev fees:
| FPGA Algorithm | Fee |
|---|---|
| Ethash | 4.0% |
| Kaspa | 10.0% |
FPGA device/algo compatibility table:
| C1100 | FK33 | U50C/ECU50 | TH53 | TH55 | E300 | CVP13 | BCU1525/BTU9P/ECU200 | |
|---|---|---|---|---|---|---|---|---|
| Ethash | Y | Y | Y | Y | Y | Y | N | N |
| Kaspa | Y | Y | Y | Y | Y | Y | Y | Y |
The miner reports GPU hash rates every 30 seconds. These are the full GPU hash rates before dev fee deduction (your pool hashrate will be slightly lower).
The miner includes a read-only api based on the sgminer-5.5 API. Both the json and text formats are supported. For more details, we refer to the sgminer api documentation. The miner also includes a Claymore miner compatible API with support for a subset of the API.
For reporting bugs and/or for features requests, please open an issue on this project's github issue tracker.
For example command lines please see the batch/shell scripts in the miner download packages. For command line options see the USAGE.txt file that comes with the miner.
